Nuri — formerly Bitwala; How To Migrate A Brand

Technical aspects of Bitwala to Nuri migration.

This is a second article in the series about Nuri rebranding. If you haven't, go ahead and read Nuri — formerly Bitwala; How To Manage An Ambitious Rebranding, which is more about processes and structure we set up for the rebranding project.

I’ve started working on this project as the only engineer and later technical lead in January of 2021. Being the only technical person in it from the start gave me freedom in choosing how to technically proceed with this massive company-wide project. It has been a blessing and a curse. I could do things my way but also anything that doesn’t go well will be attributed to me. That was enough motivation for me to try to make it as seamless as possible.

Before we started hiring people for this specific project (as explained in the previous article), I already started thinking about how to technically deliver redesign. But there were some constraints. Specifically:

Those have been the constraints we needed to work with. And as you can imagine, they meant we couldn't do things in a perfectly orderly manner but we needed to consider all of them before jumping ahead.

When doing any migration, you look at two models:

The process between the two is the ideal migration. Do it poorly and you won't arrive at the second.

Lowest possible diagram of a migration

It’s a simple and very high-level example. But it helps a lot to think about both of the models separately, figure out the constraints and possibilities, and only after to think of the specific technical implementation of the migration.

For the current state, it's helpful to have that described in documentation or at least have a good picture of it in your head. All that is possible only if you have very good documentation or a person (or people) who has been involved in building the product in the first place. It doesn't matter how much you know about the final state if you don't know the current all throughout.

The desired state needs to be clearly defined as well. Otherwise, you might end with a different result than you expect. And especially working with multiple teams, poor planning may result in creating a Frankenstein monster of a product. In rebranding projects that’s very clearly visible when different features of the same app look inconsistent with each other. Mostly due to the development of the different features being segregated into different teams.

There’s usually some resemblance of that even in well-planned redesign projects. In the best-case scenario, that’s just a few loose pixels and not the app breaking or massively inconsistent experience.

To expand on the simple migration diagram above, in our case, we needed to conserve the current state also as much as possible. Due to the limitation of having to preserve our current app.

All our changes during the development of Nuri were already published to production so the standard of quality for our work was as high as in any other released user-facing feature.

Even though the rebrand wasn’t released at that point, the Nuri app lived under the hood of the Bitwala app for months without anyone noticing.

This also posed unique challenges since the development of other features in the app didn’t stop. We couldn’t make a copy of our current app and migrate that. The existing flows were still changing under the development of the rest of the engineers in the company. If we’ve done a copy, we’d end up with a redesign of a few months old app without the new features and bug fixes.

Our desired state, therefore, included also all the work that was going to be done outside of our project. We couldn’t break other people’s work and their work couldn’t break ours.

Enough of justifying project decisions. Let’s get down to the actual implementation details.

Migrating Bitwala To Nuri

So the constraints were clear and we had a reasonably good idea of how the entire product structure is from the technical point of view. Some other things were known. We needed to work on the same app as everyone else without affecting their work. We also needed a simple way to switch back and forth in the build process.

Bash — Feature flag

With this, it's simple to just change this back and forth. Tough, we needed this flag to also be reactive. We needed that for two main reasons.

  1. The ease of development. Developers could switch back and forth between Bitwala and Nuri easily without rebuilding the app. Therefore saving time on local testing.
  2. Rollback plan. In the worst-case scenario, we needed to be able to switch from Nuri back to Bitwala without the need of releasing the app to app stores again, which might take a few days.

Since the environment variables can't change during the app runtime, we had to create a proxy for that. Another layer that'd read the flag but could become independent of the flag if we needed that.

Our app uses React Native. So this required using a react context so we can have a reactive variable isRedesign available everywhere in the app and we could easily switch it whenever we needed.

Typescript — Reactive redesign context provider

Then using the context to wrap the entire content of our app, including any parts that are fetching data from our server, dealing with translations, deal with in-app navigation, etc.

Typescript — Usage of redesign context provider

With this bare-bones setup, we were ready to start implementing. The developers didn't need to worry about the deployment process at all, they could've used the context to tell the redesign flag even if it was changed from within the app and not during app build.

This process was the same for both our native app and web since we use the same technologies for both platforms. But the redesign wasn't a monolith so there were some particularities in each of them.

Component & Screen Migrations

Redesign projects are very visual. We have an internal UI component library for native apps and for web app. The native and web libraries are separate but the approach with which we've migrated the components was the same for both.

The criteria here to easily migrate and keep the current components intact as much as we could (to prevent bugs in the migration). To do this, we've contained the old components in their own files.

To give an example, before our folder structure for a Button component looked something like this:

We've created a folder for the component first, and then renamed Button.tsx to Button.deprecated.tsx but left the content exactly the same. Then we were free to create a new Button.tsx file where our new component would live.

In index.tsx we've kept our migrations. The external API of the components might be different for the old and new components but we made sure that any new properties were still working for the old components (even though they might not have any effect there) and old props were still migrated into the new component and overridden if needed.

Typescript — index.tsx migration file

This way our components could've been considered feature-frozen. We didn't touch them at all after this and therefore we were sure that we're not breaking existing flows. The only thing we needed to test thoroughly still were the migrations themselves.

For the screen migrations, we went with a very similar approach for a lot of the screens. But screens required a more case-by-case basis approach.

After the component migration, most of the screens were already visually half-migrated which saved us a lot of work. But the navigational structure of our main screens has changed quite a bit. Before we already had separate bank and crypto portfolio screens. But now we've had a brand new Home screen that combined both into one “at a glance” screen. Also, the tabs for Invite and Trading disappeared as invite functionality has been moved into Profile and trading functionality went under crypto portfolio screens directly (or what we now call Wealth).

With so many changes in the main screens, we migrated the entire section and built that from scratch with our new components and new logic for fetching data, etc.

As many other screens were already half-migrated after component migrations, we didn't need to do too much there.

A lot of the functionality stayed the same in many flows. These flows kept their old logic and were migrated only visually. But nevertheless, our aim was also to improve the UX of certain flows and so some of them required more than visual changes.

This article could've gone way longer. There's definitely a space for more technical information about how we went about deploying all this on each platform. And also how exactly we went through all the different scenarios of migrations around our codebase. But I'll leave that be for now.

If you haven't yet, go read the first part of this article series, Nuri — formerly Bitwala; How To Manage An Ambitious Rebranding.